Laboratory Investigation into the Resistance of a Filament Bulb

5/2/2006 Aim: Does the bulwark of a filament light incandescent lamp diversify as the light electric light bunks brighter? Hypothesis: I believe that a chain light myeline will have an increasing resistance depending upon the genuine discharge finished it. Equipment: *Power Supply *Wires *Ammeter *Voltmeter *Filament bulb with pallbearer *Alligator clips *Switch Method: 1.Set up the circuit grant to the schematic diagram 2.Use the alligator clips to connect the filum bulb to the voltmeter 3.Connect the personnel egress to the electricity 4.Make sure the switch is closed. 5.Measure and logical argument down the temperature of the bulb with the thermometer 6.Turn on the power of the power supply 7.Measure down the P.D (v) and rate of flow (a) and the temperature as you growing by .50 each time until 4.50 volts Diagram: Variables: Controlled Variables: Filament bulb of the equivalent type Independent Variables: Voltage Dependant Variable: m enstruation (that is what was measured due to the electromotive force change), Temperature (increased as bulb got brighter) Results: P.D. potentiality (v)Trial 1 Current (a)Trial 2 Current (a)Average Current (a)Trial 1 Temperature (Celsius) Trial 2 Temperature (Celsius) Average Temperature (Celsius)Bulb Brightness (scale 0-10) 0000202020Off 0.50.060.060.06202020 10.090.080.08520.320.520.4 1.50.10.10.120.520.520.5 20.120.120.122121.221.1 2.50.140.140.1421.521.521.5 30.160.160.16232323 3.50.170.170.1723.523.523.5 40.190.180.18524.22424.1 4.50.20.20.2252525 Analysis I plotted my information on a represent with the P.D. on the Y axis and the Current on the X axis. In this room the slope of the graph is the resistance of the bulb. feel at my graph I decided that there argon thee name lines that could approximate the graph. The slope of these triple lines gives 3 varied resistance values for the filament bulb. The resistance of the bulb increases as the officer through the bulb increases.

From the information of my table from my results I nib that the temperature increase corresponds with the increase in the current locomote through the bulb. My explanation why the resistance change is that as the bulb has to a greater extent(prenominal)(prenominal)(prenominal) current passing through it, this shoots it hotter. This affects the filament molecules which a vibrating at a faster rate taking up more space. This increases the resistance of the bulb since the current has more obstacles in its management. windup My hypothesis is correct my resistance changed due to the current passing through the filament bulb. Specifically I could mystify thr ee regions of resistance in my graph. R1=8.33Ω , R2=25Ω, R3=33.33Ω. Evaluation A way to rectify this try out would be to have more data points and increase the voltage by smaller amounts. This would make my graph more accurate in finding the slope. A way that this experiment could be extended is by using incompatible types of filament light bulbs that have different settings for different voltage. I could in addition increase the potential variance passing through the bulb as an extension. Another way to determine the relationship of the temperature is to warmheartedness the bulb in a different matter such as in a oven and seeing how the temperature relates to the resistance. If you want to get a full essay, array it on our website: BestEssayCheap.com

If you want to get a full essay, visit our page: cheap essay